http://bolin.su.se/data/oden-eager-2011-bathymetry-1 Morten Sølvsten, Carlos Castro, Benjamin Hell, Richard Pedersen, Rezwan Mohammad Bolin Centre Database 2021 Datafile Marine Bathymetry Geophysics Arctic Ocean Bathymetry Seafloor morphology Multibeam EAGER expedition Icebreaker Oden Earth science > Oceans > Bathymetry/seafloor topography > Bathymetry Martin Jakobsson 2021-11-04T14:13:09+00:00 English 1 The bathymetric data are provided as processed grids, divided into survey areas, with a grid cell size of 12.5⁠ – ⁠100 m. The grids are provided both in polar stereographic projection (IBCAO Polar Stereographic, [EPSG 3996](https://epsg.io/3996), true scale at 75 degrees north) and in geographic coordinates ([WGS 84](https://sv.wikipedia.org/wiki/World_Geodetic_System_1984), latitude and longitude). The horizontal datum is WGS 84 and the vertical datum is instantaneous sea level, implying that the vertical level has not been corrected for tides. For each projection, the bathymetric data grids are available in four formats: GeoTiff, netCDF, ASCII XYZ and ESRI Arc ASCII grid. Data are also illustrated as JPEG images. The data were acquired in summer 2011 from Swedish icebreaker (IB) Oden during the EAGER expedition. A Kongsberg EM122 1°⁠ × 1°⁠, 12 kHz, multibeam echo-sounder was hull-mounted in IB Oden. Position, heading and attitude data were received from a Kongsberg-Seatex Seapath 320 navigation unit (GPS and GLONASS) with attached MRU5 motion sensor. The exact speed of sound at the multibeam transducers was provided by a Valeport Mini SVS/T sound speed and temperature sensor mounted in the sea-chest in Oden’s hull, close to the multibeam transducer arrays. This was interfaced with the multibeam system directly. In addition, sound speed profiles for the entire water column were provided by CTD (Conductivity, Temperature, Depth) stations as well as XBT (Expendable Bathy Thermograph) probes. The data were collected in a mixture of sea-ice conditions, ranging from 5/10 to 8/10 coverage. Navigation was provided by a Seatex Seapath 320 without local augmentation as this is not available in the area. Sound speed correction was done regularly using data from a Seabird 911+ CTD (conductivity, temperature depth) or Valeport SVP (sound velocity profiler). The EAGER expedition started and ended in Longyearbyen, Svalbard, and lasted from August 17 to September 9, 2011. It was carried out by the Continental Shelf Project of the Kingdom of Denmark in cooperation with the Swedish Polar Research Secretariat and the Swedish Maritime Administration. IB Oden served as research platform.